follow these instructions to install the tcp/ip protocol on one of your pcs only after a network card has been successfully installed inside the pc. these instructions are for windows 95, 98, and millennium. for tcp/ip setup under windows nt, 2000, or xp, please refer to your windows documentation.

    1. click the start button. choose settings, and then control panel.

    2. double-click the network icon. your network window should pop up.

    select the configuration tab.

   

    3. click the add button.

    4. double-click protocol.

    5. highlight microsoft under the list of manufacturers.

    6. find and double-click tcp/ip in the list to the right in figure f-2.

   

    7. after a few seconds you will be brought back to the main network window.

    the tcp/ip protocol should now be listed.

   

    8. click ok. windows may ask for original windows installation files. supply them as needed (e.g.: c:\windows\options\cabs., d:\win98, d:\win95, d:\win9x, etc.)

    9. windows will ask you to restart the pc. click yes. the tcp/ip installation is complete.