press the caster lock switches on and keep the casters in a locked position.
plug in and turn on the power switch. after the power lamp blinks for 2-3 seconds, it should turn green.
2 when copying...
how to use
when sliding the screen forward...
3 when replacing recording paper...
*concerning replacement of recording
paper
replace with new recording paper in the following cases:
when a red line appears at the end of the recording paper.
(a red line appears when only about one meter or so of recording paper is remaining.)
when the paper warning lamp lights red.
how to use
when a red line appears at the edges of the recording paper. the red line will appear when there is only about one meter (3 feet) or so of recording paper left on the roll.
when the paper out lamp lights red.
replace the recording paper in the following situations
please use only the correct type of recording paper.
particular attention must be given to the winding direction of the recording paper, since copying cannot be performed if the winding direction of the recording paper is reversed.
be sure to keep the recording paper straight when loading, failure to do so may cause wrinkling or tearing of the paper during the copy function.
automatic power cut-off function
if there is no key operation for about an hour, the fluorescent lamp inside the main unit automatically goes off and the machine enters a state of power conservation. (at this time, the power lamp is lit.)
if at any time any key is pressed, the fluorescent lamp light again, and the normal operating condition is restored.