if necessary, follow the directions in chapter 2 - osprey-220 hardware to install the osprey card. this software installation procedure works properly only if the card is already installed.

    installing from cd-rom:

    1. turn on the machine and start windows 2000.

    2. cancel out of the found new hardware wizard.

    3. if you are updating from a previous version of the driver, it is not necessary to uninstall the old driver before installing the new driver, unless the old driver is earlier than version 1.41.

    4. insert the osprey-220 driver cd into your cdrom drive. the installation instructions assume this is the (d:) drive. substitute the proper drive as it is configured on your system, if necessary.

    5. run the installation program

    a. click the start button

    b. click run

    c. enter d:\win2000\setup in the dialog box

    d. click ok

    6. the installation program steps are self-explanatory for many users. if you need additional information, please refer to the section entitled scenario 2: card(s) physically installed, but osprey software not installed.

    7. the driver and demo program are ready for use as soon as the installation program completes and you have rebooted the system. we suggest that you test the driver immediately. please refer to testing the installation for windows 2000.