in this case you have two options, running the installation program or using the new hardware found wizard, which is not recommended. using the hardware found wizard is particularly inconvenient if you are installing multiple cards at once, since each card has to be set up separately. this process installs only the driver and is useful only for updating the driver component. furthermore, to get the sample applications and other required items, you must still run the setup.exe program

    the manual recommends running the osprey installation program and will only give instructions for installation via that method. if the user chooses to use the hardware found wizard, they do so at their own risk.

    run the installation program

    when windows 2000 is started for the first time after the osprey card is installed, the found new hardware wizard displays one or more times. cancel out of these wizards. after windows 2000 has finished starting, do the following:

    to install the osprey drivers:

    1. using windows nt explorer, locate and access the cd-rom drive containing the osprey installation cd-rom.

    2. navigate to the win2000 directory.

    3. double-click setup.exe.

    the osprey multimedia capture driver window displays.

   

    4. click next.

    the information window displays.

   

    5. click next.

    the software license agreement window displays.

   

    6. click yes to accept the end user software license agreement. if you do not wish to accept the agreement, click no. this terminates the installation routine.

    the select components window displays.

   

    7. to set this default, select the video signal standard used in your country and click next. see video standard for more information about signal formats.

    the choose destination location window displays.

   

    8. click next. if you wish to change the destination location for the files, click browse.

    the select program folder window displays.

   

    9. click next. if you wish to change the program folder, type the new name in the program folders field.

    the start copying files window displays.

   

    10. click next. if there are any settings to be changed prior to installation, click back to return to the previous windows.

    the digital signature not found window displays.

   

    11. click yes to continue with the installation process.

    the digital signature not found window displays twice. windows 2000 recognizes the audio and video portions of the osprey cards as separate items. the audio device is also present on osprey-100 and osprey-101 cards containing extra video or power connectors in place of audio connectors.

    the digital signature not found window displays for the osprey audio capture device.

   

    12. click yes to continue.

    the required files are copied onto the computer.

    the osprey technologies special offers shortcut window displays.

   

   

    a ligos indeo question dialog window displays.

   

   

    ligos technology’s video compression and decompression software can be installed at a later time. for detailed instructions on installing ligos technology’s indeo. video, refer to installing ligos technology's indeo.

   

    15. click finish to complete the installation.

    you must restart your computer to complete the installation. do not attempt to use your osprey card until after restarting the system.