lsi logic configuration is a built-in, menu-driven configuration utility program that you can use to:

    1 perform a low-level format of a scsi hard disk drive

    2 set a scsi device scan order

    3 set a scsi id for a controller

    1. the integrated scsi controller with raid capabilities in your computer supports redundant array of independent disks (raid). you can use the lsi logic configuration utility program built into your computer to configure raid level 1 for a single pair of attached devices.

    2. if you install a different type of raid adapter in your computer, use the configuration method supplied with the raid adapter to view or change scsi settings for attached devices.

    the following sections provide the instructions needed to start the lsi logic configuration utility program and to format a scsi hard disk drive.