fcc part 15 notice (applicable to use within the usa)
operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
the user may find the following booklet prepared by the federal communications commission helpful: the interference handbook.
this booklet is available from the u.s. government printing office,washington, d.c. 20402. stock no. 004-000-00345-4.
unintentional radiator
this equipment has been tested and found to comply with the limits for a class b digital device as applicable, pursuant to part 15 of the fcc rules. these limits are designed to provide reasonable protection against harmful interference in a residential installation. this equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. however, there is no guarantee that interference will not occur in a particular installation. if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1 reorient or relocate the receiving antenna.
2 increase the separation between the equipment and receiver.
3 connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4 consult the dealer or an experienced radio/tv technician for help.
manufacturer’s declaration of conformity
3com corporation 3930 w. parkway blvd.
west valley city, ut 84119 (800) 527-8677
declares that the product:
date: 28 may 2001
brand name: 3com corporation m/n: sl-1020, sl-1021
equipment type: bluetooth wireless device
intentional radiator
fcc radio-frequency exposure notice
this device generates and radiate radio-frequency energy. in order to comply with fcc radio-frequency radiation exposure guidelines for an uncontrolled environment, this equipment has to be installed and operated while maintaiing a minimum body to antenna distance of 2.5 cm (1.0 inch).
this wireless product does not contain any user serviceable components. any unauthorized product changes or modifications will invalidate 3com’s warranty and all applicable regulatory certifications and approvals.
industry canada notice (applicable for use within canada)
this device complies with canadian rss-210.
to prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. equipment (or its transmit antenna) that is nstalled outdoors is subject to licensing.
the installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit rf field in excess of health canada limits for the general population; consult safety code 6, obtainable from health canada’s website www.hc-sc.gc.ca/rpb.
avis de conformite a la reglementation d’industrie canada
cet appareil est conforma la norme cnr-210 du canada.
pour empecher que cet appareil cause du brouillage au service faisant l’objet d’une licence, cet appareil doit etre utilise a l’interieur seulement
et devrait etra place loin des fenetres afin de fournir un ecran de blindage maximal.
l’installateur du present materiel radio doit s’assurer que l’antenne est situee ou pointee de maniere a ce que cette derniere n’emette pas de champs radioelectriques superieurs aux limites specifiees par sante canada pour le grand public; condulter le code de securite 6, disponible
sur le site web de sante canada, a l’adresse suivante: www.hc-sc.gc.ca/rpb.
safety
this equipment has been evaluated according to the following safety standards and is intended for use only in information technology
equipment which has been evaluated to these or other equivalent standards:
ul standard 60950 / csa c22.2 no. 60950 iec 60950
european community ce notice
equipment meets or exceeds the following technical standards:
1 ets 300 328 — electromagnetic compatibility and radio spectrum matters (erm); wideband transmission systems; data transmission equipment operating in the 2,4ghz ism band and using spread spectrum modulation techniques
2 ets 300 826 — electromagnetic compatibility and radio spectrum matters (erm); electromagnetic compatibility (emc) standard for 3,4
ghz wideband transmission systems and high performance radio local area network (hiperlan) equipment
-- en 55022 (1998) — limits and methods of measurement of radio interference characteristics of information technology equipment.
(cispr 22 class b).
-- en 55024 (1998) — information technology equipment - immunity characteristics - limits and methods of measurement.
1 es 59005 — considerations for the evaluation of human exposure to electromagnetic fields (emfs) from mobile telecommunication equipment (mte) in the frequency range 30 mhz - 6 ghz
2 en 60950 — safety of information technology equipment, including electrical business equipment
this device may be used throughout the european community.
user guide version 1.1.2 published april, 2001