after your pc is configured and has rebooted, you can check the tcp/ip configuration using the windows 95, 98, and millenium utility winipcfg.exe (for windows nt systems, use ipconfig.exe).

    to check your pc's tcp/ip configuration:

    1. on the windows taskbar, click the start button, and then click run.

    the run window opens.

    2. type winipcfg, and then click ok.

    the ip configuration window opens, which lists (among other things), your ip address, subnet mask, and default gateway.

    3. select your ethernet adapter.

    the window is updated to show your settings, which should match the values below if you are using the default tcp/ip settings that netgear recommends:

    1?the ip address is between 192.168.0.2 and 192.168.0.31

    2?the subnet mask is 255.255.255.0

    3?the default gateway is 192.168.0.1