1. select option 21 from the main menu.
the menu 21 - filter set configuration (figure 10-1) opens.
from this menu, you can choose from 12 filter sets.
2. select the filter that you want to configure or choose an unused set to create a new filter.
in order to distinguish between the 12 filter sets, each filter set should have a name or description. when you select a set for editing, you are prompted to provide descriptive text to be displayed in the comment field of menu 21 next to the filter number.
3. when you have finished filling in the edit comments field, press [enter] at the press enter to confirm... prompt to confirm your selections, or press [esc] at any time to cancel your selections.
the new information is displayed in the read-only section of menu 21 - filter set configuration.
4. press [enter] to display menu 21.1 - filter rules summary (figure 10-2).
the information in this menu is read-only; the parameters of each rule that you configured for that set are displayed.
table 10-1 lists and describes the abbreviations used in menu 21.1 - filter rules summary.
table 10-1. abbreviations used in menu 21.1 - filter rules summary
table 10-1. abbreviations used in menu 21.1 - filter rules summary (continued)
for more information about filter rules, refer to “configuring a filter rule,” on page 10-6.
if the filter type is ip (tcp/ip), the abbreviations listed in table 10-2 are used.
table 10-2. abbreviations used if filter type is ip
if the filter type is gen (generic), the abbreviations listed in table 10-3 are used.
table 10-3. abbreviations used if filter type is gen
to configure a specific filter rule, select the number of the filter rule (1–6) that you want to configure and press [enter] to display menu 21.1.1 - tcp/ip filter rule (figure 10-3).
