2. 将powerlink电缆的10针rj45插头插进ms6220串口扫描仪.
如果ms6220直接从主机系统取电，则跳至第5步。(请注意本页下方的警示语句↑*)
3. 将电源的l形插针插进powerlink电缆的电源插孔。(请注意本页下方的警示语句↑**)
4. 确保电源的交流电输入要求同插座的规格相匹配。将电源插进插座。
5. 将powerlink电缆插进主机的适当端口。
6. 打开主机系统。
7. 当ms6220准备扫描时，绿色led点亮，红色led闪亮一下，扫描仪发出一声鸣响。
扫描仪与主机系统某一端口的连接并不能确保扫描信息的正确传输。扫描仪、主机、或两者可能均需设置后才能保证正常通信。
1.to maintain compliance with applicable standards, all circuits connected to the scanner must meet the requirements for selv (safety extra low voltage) according to en 60950.
2.*to maintain compliance with standard csa c22.2 no. 950/ul 1950 and norm en 60950, the power source should meet applicable performance requirements for a limited power source.
3.**to maintain compliance with federal regulations 21 cfr, part 1040.10, section (f)(6) the scanner must be plugged into an electrical outlet with a switch accessible to the user or be powered by a host system containing a switch that will disable power to the scanner.