2. 将powerlink电缆的10针rj45插头插进ms6220键盘口扫描仪。
3. 将电源的l形插针插进powerlink电缆的电源插孔。(请参看第6页的厂家建议)。
4. 确保电源的交流电输入要求同插座的规格相匹配。将电源插进插座。(请注意本页下方的警示语句↑**)
5. 将键盘与主机断开。
6. powerlink“y”形电缆的一端是5孔din接头，另一端是6针迷你din接头。metrologic公司还会附送一根一端是5针din接头、另一端是6孔迷你din接头的适配电缆。根据端口需求，将适配电缆合适的一端连到powerlink电缆上，而将另一端预留，以连接键盘和主机的键盘口。
7. 将powerlink“y”形电缆与键盘和主机的键盘口相连。
8. 打开主机系统。
9. 当ms6220准备扫描时，绿色led点亮，红色led闪亮一下，扫描仪发出一声鸣响。
1.to maintain compliance with applicable standards, all circuits connected to the scanner must meet the requirements for selv (safety extra low voltage) according to en 60950.
2.*to maintain compliance with standard csa c22.2 no. 950/ul 1950 and norm en 60950, the power source should meet applicable performance requirements for a limited power source.
3.**to maintain compliance with federal regulations 21 cfr, part 1040.10, section (f)(6) the scanner must be plugged into an electrical outlet with a switch accessible to the user or be powered by a host system containing a switch that will disable power to the scanner