a. tilt/swivel cup assembly
[mlpn 45-45967a]
b. weighted base assembly
[mlpn 45-45967b]
1b weighted base
[mlpn 36-36765]
2b. rotating base
[mlpn 45-45577]
3b. wood screws, #10 flat head
[mlpn 18-18857]
adjustable stand free-standing installation [kit #45-45967]
step 1
locate the front mark on the weighted base assembly [mlpn 45-45967b]
step 2
align the tilt/swivel cup assembly [mlpn 45-45967a] with the weighted base assembly [mlpn 45-45967b].
step 3
press down firmly on the tilt/swivel cup assembly until it snaps into place on the weighted base.
adjustable stand hard mount installation [kit #45-45967]
step 1
remove the four screws holding the rotating base [mlpn 45-45577] to the weighted base [mlpn 36-36765].
step 2
note the position of the front mark on the rotating base then use the rotating base as a guide to drill four pilot holes (hard wood - #31 drill or soft wood -#43 drill) in the countertop.
step 3
secure the rotating base [mlpn 45-45577] to the countertop with the four #10 wood screws [mlpn 18-18857] provided.
step 4
align the tilt/swivel cup assembly [mlpn 45-45967a] with the rotating base [mlpn 45-45577] as indicated below.
step 5
press down firmly on the tilt/swivel cup assembly until it snaps into place over the rotating base.
additional stand options available for purchase:
wall mounting kit [mlpn 45-45968] for use with the adjustable stand
stationary stand [mlpn 45-45429]
