figure 13: leds

   

    flashing green and one razzberry tone

    this indicates the scanner has experienced a laser subsystem failure. return the unit for repair at an authorized service center.

   

    flashing red and green and two razzberry tones

    this indicates the scanner has experienced a motor failure.

    return the unit for repair at an authorized service center.

   

    continuous razzberry tone with both leds off

    if, upon power up, the scanner emits a continuous razzberry tone, then the scanner has an electronic failure. return the unit for repair at an authorized service center.

   

    three beeps - on power up

    if the scanner beeps 3 times on power up then, the nonvolatile memory that holds the scanner configuration has failed.

    return the unit for repair at an authorized service center.