1. blink power save mode (default):
"blinks" the laser off & on after a programmed period of non-use.
when the scanner recognizes a bar code it will exit the blink mode.
2. laser off power save mode:
turns the laser off after a programmed period of non-use.
the motor continues to spin allowing for a faster "wake" up time. pressing the multi-function button will "wake" the scanner from the laser off power save mode (see figure 17).
3. laser & motor off power save mode:
turns the laser and motor off after a programmed period of non-use.
pressing the multi-function button will "wake" the scanner from the power save mode (see figure 17). this mode is the only power save mode that can be activated by the multi-function button (see figure 16). this mode's "wake up" time is slightly longer due to the motor's need to restart.
4. dual action power save mode #1:
"blinks" the laser off & on after a programmed period of non-use turns the laser and motor off at thirty-minute intervals.
example:
if the power save timeout is set to 15 minutes.
pressing the multi-function button will "wake" the scanner from the power save mode (see figure 17).
5. dual action power save mode #2:
turns the laser off after a programmed period of non-use then turns the motor off after thirty-minute intervals.
example:
if the power save timeout is set to 15 minutes.
pressing the multi-function button will "wake" the scanner from the power save mode (see figure 17).
figure 14: the multi-function button
figure 15: changing the beeper tone
changing the beeper tone
a short ([3 second) depression and the beeper tone will change. the new tone will be heard, followed by a short pause. then two more of the new tones will be heard signifying the new setting has been stored in memory. the silent (no beep) tone is also selectable.
figure 16: laser & motor off power save mode
placing the unit in laser & motor off power save mode
long (]3 seconds) depression
the laser & motor off power save mode is the only power save mode that can be activated with the multi-function button.
figure 17: normal operation
waking the unit from all power save modes
the next button depression will awaken the scanner for normal operation.