many functions of the scanner can be " programmed" - that is, enabled or disabled. the scanner is shipped from the factory programmed to a set of default conditions. the default parameter of the scanner has an asterisk (*) in the charts on the following pages. if an asterisk is not in the default column then the default setting is off or disabled. every communication does not support every parameter. if the communication supports a parameter listed in the charts on the following pages, a check mark will appear.

   

   

   

   

   

    default settings for "aux" interface

    the slave scanner and the ms7320 always communicate via rs232. data is relayed to the host via various primary interfaces.