the ms7320 scanner interfaces terminate to 10-pin modular jacks located on the back of the unit. the serial # label indicates the model number of the scanner.
figure 28: scanner interface ports
figure 29: scanner interface ports
cable connector configurations (host end)
xxx* specifies connection to the host
9-pin d-type conn.
usb type a (top)
locking type a (bottom)
10-pin modular plug
6-pin male mini-din conn.
cable connector configuration
the powerlink cable is terminated with a 5-pin din female connector on one end, and a 6-pin mini din male on the other.
metrologic will supply an adapter cable with a 5-pin din male connector on one end and a 6-pin mini din female connector on the other.
according to the termination required, connect the appropriate end of the adapter cable to the powerlink cable, leaving the necessary termination exposed for connecting to the keyboard and the keyboard port on the pc.
the pin assignments are as follows:
