the system attention led can be turned off by using either resetting the system attention led on hmc-attached systems or resetting the system attention led on systems not attached to an hmc.

    resetting the system attention led on systems attached to an hmc

    to reset the system attention led on hmc-attached systems, do the following:

    1. on the hmc graphical interface, click service applications.

    2. double-click service focal point.

    3. in the contents area of the screen, select hardware service functions. the led management window opens.

    4. in the led management window, select one or more managed systems from the table.

    5. select deactivate led. the associated system attention led is turned off.

    for more information about the virtual operator panel on the hmc, see the ibm hardware management

    console for pseries installation and operations guide.

    resetting the system attention led on systems not attached to an hmc

    as a user with root authority, type diag on the aix command line, and do the following:

    1. select task selection.

    2. on the task selection menu, select identify and attention indicators.

    3. when the list of leds displays, use the cursor to highlight set system attention indicator to normal.

    4. press enter, and then press f7 to commit. this action turns off the led.

    if the system is powered off, access the service processor menus. from the service processor main menu, do the following:

    1. select system information menu.

    2. select led control menu.

    3. select clear system attention indicator. this action turns off the led.

    resetting the system attention led on systems not attached to an hmc with

    linux installed

    the system must be powered off to access the service processor menus. from service processor main menu, do the following:

    1. select the system information menu.

    2. select led control menu.

    3. select clear system attention indicator. this action turns off the led.