Using the CD-ROM Drive
a class 1 laser is contained in the device. do not attempt to operate the drive while it is disassembled. do not attempt to open the covers of the drive as it is not serviceable and is replaced as a unit.
c07
this section describes the features of the 40x scsi-2 cd-rom drive and provides instructions for handling the drive and cd-rom discs. the cd-rom is a half-high, 5.25-inch, 8-bit, single-ended, tray-loading drive. its features include the following:
1 scsi-2 interface supports both synchronous and asynchronous data transfer
2 high-speed data transfer rate of 2100 kb per second (14x) at inner diameter and 4800 kb per second (32x) at outer diameter due to constant rpm spin rate
3 high-speed synchronous burst rate of 10 mb per second
4 average random access time of 90 ms
5 loading tray accommodates both 8-cm discs (in the horizontal orientation only) and 12-cm discs
6 reads multi-session discs
7 reads cd-recordable discs
8 reads cd-rw discs
9 supports all major cd-rom formats: mode 1, mode 2, xa, cdda, and audio
10 headphone output and line output for audio