observe the following safety instructions anytime you are connecting or disconnecting devices attached to the workstation.

    an electrical outlet that is not correctly wired could place hazardous voltage on metal parts of the system or the devices that attach to the system. it is the responsibility of the customer to ensure that the outlet is correctly wired and grounded to prevent an electrical shock.

    before installing or removing signal cables, ensure that the power cables for the system unit and all attached devices are unplugged.

    when adding or removing any additional devices to or from the system, ensure that the power cables for those devices are unplugged before the signal cables are connected. if possible, disconnect all power cables from the existing system before you add a device.

    use one hand, when possible, to connect or disconnect signal cables to prevent a possible shock from touching two surfaces with different electrical potentials.

    during an electrical storm, do not connect cables for display stations, printers, telephones, or station protectors for communications lines.

    d05

    to prevent electrical shock hazard, disconnect all power cables from the electrical outlet before relocating the system.

    d01

    this product is equipped with a three-wire power cable and plug for the user’s safety. use this power cable with a properly grounded electrical outlet to avoid electrical shock.

    c01

    this unit has more than one power supply cord. to reduce the risk of electrical shock, disconnect two power supply cords before servicing.

    c21

    this unit weighs more than 55 kg (121.2 pounds). material handling systems such as levers, slings, or lifts are required to safely move it. when this is not possible, specially trained persons or services (such as riggers or movers) must be used.

    c06