a listing at the top of the main menu contains the following:

    1 your system’s current firmware version

    2 the firmware copyright notice

    3 the system name given to your server during setup

    you need the firmware version for reference when you either update or repair the functions of your service processor.

    the system name, an optional field, is the name that your server reports in problem messages. this name helps your support team (for example, your system administrator, network administrator, or service representative) to more quickly identify the location, configuration, and history of your server. set the system name, from the main menu, using option 6.

    the information under the service processor firmware heading in the following main menu illustration is example information only.

   

    1 service processor setup menu

    see “service processor setup menu” on page 18 for more information.

    2 system power control menu

    see “system power control menu” on page 22 for more information.

    3 system information menu

    see “system information menu” on page 25 for more information.

    4 language selection menu

    see “language selection menu” on page 32 for more information.

    5 call-in/call-out setup menu

    this function is not available on this system.

    6 set system name

    allows setting of the system name.

    7 reset all l3 cache module records

    clears l3 gard records after a repair action.

    this is a hidden menu option for use only by a service representative.

    allows setting of the system name.