option 1
select install or boot a device, allows you to select a device to boot from or install the operating
system from. this selection is for the current boot only.
option 2
select boot devices, allows you to set the boot list.
option 3
multiboot startup, toggles the multiboot startup flag, which controls whether the multiboot menu is invoked automatically on startup.
if option 1 is selected, the following menu displays:
if a device is selected that does not reside in the system, a menu with the following message displays:
if hard drive is selected, the following menu displays:
if list all devices is selected, a menu similar to the following displays, depending on the devices that are installed in the system:
the appropriate device can then be selected for this boot or installation.
when a device is selected for installing the operating system, or to boot from, the select task menu allows you to get more information about the device, or to boot from that device in normal mode or service mode.
the following is an example of this menu.
if either normal mode boot or service mode boot is selected, the next screen will ask, ″are you sure?″. if you answer yes, the device will be booted in the appropriate mode. if you answer no, the firmware will return to the select task menu.