1 run install.exe on the workstation you are configuring.
for the client version of intranetware 4.11, you can find install.exe on the intranetware cd at:
1 \products\vlm\ibm_6\install.exe
2 \products\vlmip\ibm_6\install.exe (the tcp/ip client)
for the server version of intranetware 4.11, you can find install.exe on the intranetware cd at:
·\public\client\doswin
this option is not available on netware 3.12
for 4.1 / 3.12 clients, you can find install.exe on the netware workstation for dos disk. it must be version 1.21 or greater (supplied with intranetware 4.11). to ensure you are using the correct version, right-click install.exe and then click properties. version information appears on the netware version tab.
2 follow the screen prompts including the following options:
3 select a network driver and set configuration options. do not select a driver from the list novell provides; rather, choose other driver and insert the intel adapter disk.
4 select the intel adapter.
5 optionally set:
1 frame type
2 adapter node address
3 force duplex mode
4 line speed
6 install copies of the appropriate files to your hard drive and set net.cfg. this is the final step.
because some switches link slower than others, you may have to allow more time before running vlm. if you run vlm and don't get a valid connection, run vlm -u and then try running vlm again.