autoexec.bat:

    cd\nwclient

    lsl

    e1000odi

    ipxodi

    netx (or vlm optional for netware 3.12 or higher)

    net.cfg:

    link driver e1000odi

    frame ethernet_802.2 (generally netware 3.12 and later servers);frame ethernet_802.3 (generally netware 3.11 and earlier)

    speeduplex = 3

    protocol ipx eo ethernet_802.2

    netware dos requester

    first network drive = f (used only with the vlm.exe).

    pb buffers = 10

    speeduplex parameter: 0=10mbps half-duplex; 1=10mbps full-duplex; 2=100mbps half-duplex; 3=100mbps full-duplex. the speeduplex keyword is only needed when you are forcing the card to a lower speed and duplex. the link partner must also be forced to the same setting.