this version of e100bodi.com requires vlm client version 1.21.

    1 run install.exe on the workstation you are configuring. the program can be found in the following locations:

    for intranetware 4.11:

    from the intranetware cd:

    \products\vlm\ibm_6\install.exe

    \products\vlmip\ibm_6\install.exe (the tcp/ip client)

    or (server):

    \public\client\doswin

    for 4.11 clients: from the workstation from the netware workstation for dos disk. it must be version 1.21 or greater (supplied with intranetware 4.11.)

    2 follow the screen prompts including the following options:

    1 directory on the hard drive for the client software. default directory is c:\nwclient. you can specify another directory.

    2 automatically update config.sys and autoexec.bat files? y/n

    3 specify the directory to load windows (if applicable) and option to customize for windows.

    4 configure workstation for back-up by a netware server.

    3 select a network driver and set configuration options. do not select a driver from the list novell provides. instead, choose other driver and insert the intel adapter disk.

    4 select the intel pro/100+ lan adapter. then optionally set the frame type, adapter node address, force duplex mode, and line speed. see netware command line parameters and keywords for possible values for these parameters.

    5 install copies the appropriate files to your hard drive and sets net.cfg. at this point, the install process is complete.