lan server and os/2 requester (4.0 or 3.0)

    1 run the mpts utility with lan server 4.0 or os/2 requester 4.0 (run the laps utility with lan server 3.0 or os/2 requester 3.0).

    2 click install.

    3 when prompted, insert the configuration and drivers disk in the drive, specify [drive]:\os2 for driver location, and click ok.

    4 when install reads the e100be02.nif (10/100 mbit) or e1000.nif (gigabit) file, installation is complete. click ok. the adapter driver has been copied to your system.

    5 click configure from the mpts window.

    6 at the configure window, make sure the lan adapters and protocols option is selected, then click configure.

    7 at the laps configuration window, select the intel adapter (os/2 driver: e100b.os2 for 10/100 mbit, or e1000.os2 for gigabit) from the network adapters window.

    8 click add in the network adapter window to add the intel pci adapter to the current configuration.

    9 select your desired protocol(s) from the protocol window and click add to add the protocol(s) to the current configuration.

    10 click ok when you're done and follow the prompts to exit mpts. your config.sys is automatically updated.

    11 restart the computer for the changes to take effect.