1 for paper with 80 g/m2 or thicker use the steeper position (left picture);
2 for thinner paper use the less inclined position (right picture).
3 check, if the manual sheet insertion is installed.
4 move the left hand paper guide into the position indicated by ±. (22) on the insertion guide. in this setting the margin has the smallest value possible.
5 adjust the right hand paper guide to the width of the paper to be used.
6 select manual as the paper source using either the menu settings or your software (see also chapter 1.9 paper source selection).
if continuous form paper is in print position on the platen and has not been teared off, it will be moved forward and tear off paper will be displayed.