after pressing the insert/eject key, fanfold paper from the park position is fed into the print position, and fanfold paper from the print position is fed into the cut/tear off position (depending on the setting or the printer type). paper that has been retracted into the cut/tear off by the insert/eject key will be moved automatically into the print position once the printer receives a print command.

    this key is not active while the top cover is open.

   

    the paper moves / " (0.28 mm) in the direction of the arrows. holding 1 90 down the key results in continuous feeding.

    forward movement of paper from the park position is stopped at the print position. forward movement of paper from the print position is stopped at the tear off position or it will be cutt off (depending of the setting or of the printer type).

    backward movement of paper is stopped at either the park position, the print position or the tear off position.

   

    1 turns off the stop indicator

    2 makes the printer ready for operation

    3 either starts the printout or self-test functions when selected (see menu mode) or causes the interface status to change to ready or busy (displayed)

    4 exits the menu mode.