the heading print out gives information about the version of the printer's firmware.

    the next two headings are followed by two columns of standard settings:

    1 interface - for communication between the computer operating system and the printer it is necessary to have the same communication settings or features. the standard settings are:

    1 buffer 8 kbyte

    2 word length 8 bit

    3 i/f type shared

    4 baud rate 9600 bit/s

    5 parity bit even

    6 protocol dtr

    7 auto-status no

    2 adjustment - all parameters are for adjustment of the printer and the paper (see also the following pages).

    the last part of the printout is a list with all macro settings. in this case macro 4 is marked with an asterisk (.) which identifies it as the active macro.

    if you do not save new settings, they are lost when you turn the printer off and on.

    if you make modifications via the application in the active macro you will find the new settings under the heading current settings.