the following main functions are available:
1 macro select
printer settings for different applications. for example: application a needs 12" paper and in application b banking checks are printed.
2 change macro
in this part it is possible to create a macro for specific application needs (for detail information see chapter function change macro beginning on the next page).
most parameters can be set via the control panel or via escape sequences from the host computer.
3 installation
in the first sub-function named interface you can manipulate parameters in the second sub-function labelled adjustment you can optimize your printouts.
4 save
any desired changes to the default settings can be saved here. after power while this function is executed the display flashes saving now.
to select one of the four macros which can be used for changing quickly theto enable communication with the host.
on and off the new settings are still activated.
5 print out
this function initiates a printout of the parameter settings and macro definitions. this printout is helpful for future reference and when macros need to be changed.
to actually start the print operation it is necessary to leave the stop mode
