print head technology
serial impact dot matrix (sidm) technology.
paper path
flat bed technology.
print head
24 needles, needle diameter 0.25 mm (0.01 inch), lifetime approximately 350,000 pages (standard din letter)
fonts
data, letter gothic, letter gothic italic, courier, micro, orator, orator-c, roman, prestige, script, ocr a, ocr b, data block; all fonts (except data, data block) in letter quality (lq) and near letter quality (nlq). ocr a, ocr b only in lq.
character attributes
bold, double strike, italic, underline, double underline, overline, strike through, sub/superscript, double/triple height, double/triple width, double/triple/quadruple size, condensed.
character pitch
standard character pitches are: 10, 12, 15, 17, 18, 20 cpi and proportional. in addition, commands are defined to select non-standard character pitches. it is also possible to print overlapped characters. fonts will be compressed if smaller pitches are selected.
print speed (at 10 cpi)
1 draft quality 700 cps,
2 near letter quality 350 cps,
3 letter quality 175/117 cps . **
throughput acc. to ecma-132
standard letter (dr. grauert)
1-play fanfold
draft quality: 750 pages/h
near letter quality: 520 pages/h
letter quality: 320 pages/h * **
*performance
**depending on the selected font
character sets
1 iso-7-bit in 11 national versions incl. ascii, ibm-pc and -ps/2 (multilingual)
2 iso 8859/1 ibm character set 1/2 incl. 14 national versions.
3 epson extended graphic character set incl. 15 national versions.
4 ibm code page 437, 850, 860, 863, 865.
barcode
- code 39, 2 of 5 industrial, 2 of 5 interleaved, codabar (monarch), ean 8, ean 13, code 93, msi mod 10/10, upc-e, upc-a, code 128 (incl. ean 128) and postnet (see appendix g barcode quick reference)
emulations
1 ibm 4207 proprinter xl24 (agm)
2 epson lq 1060/2550
3 philips gp 310/490.
graphics
max. resolution (v x h). 180 x 360: single pass
360 x 360: double pass.
print format
136 characters at 10 cpi
line spacing
2, 3, 4, 6, 8, 12 n/360 lpi
platen gap control
automatic gap control (agc) and programmable platen gap control (pcc).
ribbon
black fabric ribbon for up to 16 million characters.
copies
1 original + 5 copies (max. total form thickness 0.5 mm [0.02 inch] ).
paper handling
integrated push tractor with park position for continuous paper, zero tear off,and for the printer with cutter also a cut function.
paper output
printer with cutter
1 batch output to the rear
2 stacker output to the top for single sheets, using the cutting device, face down in a logical order, capacity up to 200 sheets with 80g/m2, 1-play
3 batch output to the rear of cut sheets with the option cut sheet tray, capacity up to 600 sheets 80g/m2, 1-play
printer without cutter
1 batch output to the rear
2 single sheets din a4 portrait (option); input cassette also output
processing sticky labels:
1 the surface of a label must by absorbent for the liquid of the ribbon
2 labels must not detach from the fanfold paper
3 if the edges do not adhere to the paper the label could get stuck under the
processing sticky labels on the printer with cutter:
- cutting through a sticky label leaves glue on the blade, leading to problems with the cutting device. small parts of a cut through label could detach from its paper and get stuck under the shield of the print head or even block the cutter completely.shield of the print head
interface
1 parallel centronics
2 serial rs-232-c/v.24
buffer
- up to 30 kbyte in selectable sizes;
optional with ram extension up to 160 kb possible
diagnostics
selftest, `hex dump', device status and remote diagnostics via interface.
control panel
16 character lcd for menu controlled setup, status- and error messages.
dimensions
weight
printer without cutter 28.8 kg / 63 lbs
printer with cutter 33 kg / 72 lbs
rated voltage
100 - 120 / 200 - 240 v~ at rated f = 50 - 60 hz
power consumption
200 w operating, 40 w stand by.
environmental temperature
operating: + 10ec to + 35ec (+ 50ef to + 95ef)
storage: - 40ec to + 70ec (- 40ef to + 158ef)
relative humidity
20% - 80% (operating)
5% - 85% (storage)
noise
less than 55 db(a) (operating) iso 7779
(sound level measured from outside of the housing by an distance of 39.5 inch)
mtbf
10,000 h at 30% duty cycle
agency approvals
vde (iec 950), ul 1950, c-ul, ce, fcc-b
printer stand
provides is the optimum work station convenience.
width = 630 mm / 25"
depth = 620 mm / 24.8"
710 mm / 28" (optional with v-stacker support)
height = 860 mm / 34"
v-stacker support
optional to lay down fanfold paper in the best way
width = 460 mm / 18.4"
depth = 320 mm / 12.8"
height = 450 mm / 18"
cut sheet tray only for printer without cutter
optional to collect single sheets for output at the rear (batch)
width = 440 mm / 17.6"
depth = 240 mm / 9.6" for short formats (shortest position)
360 mm / 14.4" for long formats
height = 200 mm / 8"
capacity = up to 600 single sheets
tractor cassette
a convenient option for quick changes of different types of fanfold paper and form sets.
width = 520 mm / 20.8"
depth = 120 mm / 4.8"
height = 40 mm / 1.6"
single sheet feeder cassette only for printer without cutter optional to operate single sheets in din a4 portrait format. mount position is the upper tractor.
width = 520 mm / 20.8"
depth = 290 mm / 11.6"
height = 42 mm / 1.7"
pm ibm coax scs
standard pm functions with parallel and serial interface; emulation of ibm 3270 printer like 3287, 3268, 4214 or 3262 with intelligent pc-host sharing.
pm ibm twinax scs
standard pm functions with parallel and serial interface; emulation of ibm 4214/2, 5256, 5224 or 5225 printer with intelligent pc-host sharing for ibm systems s/4, s/36, s/38 or as/400.
pm ibm twinax ipds
standard pm functions with parallel and twinax interface for ibm 3812 and ibm 4224 emulation and system connection for as/400, s/38 and s/36. supported ipds towers: dc/1, pt/2, im/1, ol/1, ps/1, dr/2, and bc/1.
pm ethernet
standard pm function with serial interface, allows direct attachment to ethernet lans simultaneous operation of ipx/spx under novel netware and tcp/icp under bsd-, system v-, and aix v.3 unix operating systems is possible. pm token ring
standard pm function with serial interface, allows direct attachment to token ring lans simultaneous operation of ipx/spx under novel netware and tcp/icp under bsd-, system v-, and aix v.3 unix operating systems is possible.
pm igp
standard pm functions with parallel and serial interface plus printronix igp 10/20/40 emulation.
