normally, you incorporate the firebox into your network when you run the quicksetup wizard, as described in "running the quicksetup wizard?on page 35. however, you can also create a basic configuration file from scratch using several functions in policy manager.

    each of the procedures in this section can also be used to override any settings you made using the quicksetup wizard. it is recommended that you follow these steps in the following order to make sure that all necessary information is provided (although not all steps are required in all installations).

    1?starting a new configuration file

    2?setting up firebox interfaces

    3?adding secondary networks

    4?setting up dns and wins servers

    5?setting up the firebox as a dhcp server

    6?adding the four basic services to policy manager

    7?configuring routes