from the windows desktop:

    1 select start =] programs =] watchguard =] control center.

    2 if you have not yet configured your firebox, click quicksetup to start the quicksetup wizard, as explained in the quickstart guide included with your firebox. otherwise, click continue.

    the connect to firebox dialog box appears. you can connect to a firebox at this point, or you can cancel the connect to firebox dialog box and connect to a firebox later.

    3 use the firebox drop list to select a firebox.

    you can also type the ip address or dns name of the firebox. when typing ip addresses, type the digits and periods in sequence. do not use the tab or arrow key to jump past the periods. for more information on entering ip addresses, see “entering ip addresses” on page 38.

    4 enter the firebox status (read-only) passphrase.

    5 click ok.