once you’ve attached the cable-management arm, you can put the server into the rack.

    1 at the front of the rack, lift the server to the level where the enclosure’s cover is installed and slide the server into the cover.

   

    2 secure the server in the rack by tightening the thumbscrews on the front.

   

    3 to further secure the server and prevent removal of the drive modules, use the enclosure key (supplied with the server) to fasten the security lock on the front panel. (see the illustration above.)

    4 if you’ve installed the server in a cabinet, replace and close the cabinet door.

    once the server is secured in the rack or cabinet, you can attach cables for the server’s connections.

    see “connect cables to the server” on page 40 for details of connecting cables and using the cable-management arm.