acpi aware o/s

    this item supports acpi (advanced configuration and power management interface). use this item to enable or disable the acpi feature.

    → the choice: yes or no.

    power management

    use this item to enable or disable a power management scheme. if you enable power management, you can use the items below to set the power management operation. both apm and acpi are supported.

    → the choice: enabled or disabled .

    suspend time out

    this sets the timeout for suspend mode in minutes. if the time selected passes without any system activity, the computer will enter power-saving suspend mode.

    → the choice: enabled or disabled .

    hard disk time out

    this item sets up the timeout to power down the hard disk driver, if there is no hard disk activity after passing the preset period of time

    → the choice: enabled or disabled .

    restore on ac/power loss

    this allow you to set whether you want your system to reboot after power

    has been interrupted

    →?the choice: power off, power on or last state.

    resume on rtc alarm / date / hour / minute / second

    the system can be turned off with a software command. if you enable thi sitem, the system can automatically resume at a fixed time based on the system's rtc (realtime clock). use the items below this one to set the date and time of the wake-up alarm. you must use an atx power supply in order to use this feature.

    →?the choice: enabled or disabled .

    lan/ring power on

    the system can be turned off with a software command. if you enable this item, the system can automatically resume if there is an incoming call on the modem. you must use an atx power supply in order to use this feature. ?

    → the choice: enabled or disabled .