step 1: to configure your switch through the console port, it is necessary to first configure a terminal emulation program. the hyperterminal for windows 95, 98, and nt is suggested.

    step 2: configure the baud rate and character format of the terminal or pc to match the default settings shown below.

    console port default settings

   

    step 1: first, check if the switch, cables, and computers are all properly connected.

    step 2: connect a pc or any vt100 compatible terminal to the console port at the back of the switch using the included rs-232 serial cable.

    step 3: power on the switch.

    step 4: turn on the pc and enter the hyperterminal program of the windows os. press the 'enter' key ; the smart function of the switch will then show in hyperterminal of the windows os.