no dial tone

    1 check that all connections are correct and tight.

    2 make sure the short cable is connected to a standard analog phone line.

    3 try a different line.

    telephone does not ring

    1 adjust the ringer volume on the bottom of soandstation.

    short silences echoes, or clipped speech

    1 don't move soundstation while it's in use.

    2 keep your hands away from the unit during calls.

    3 keep papers, cups, coffee pots, etc. away from the unit.

    4 at the beginning of a call, let someone at each location speak in turn for a few moments, to enable soundstation to adapt to its environment.

    5 the other party may be using lower—quality equipment or a half-duplex conference bridge,in which case there may be little you can do.

    6 try calling again to see if another line provides a better connection.

    muffled or "in a well" reception

    1 speak closer to the unit so the microphones can pick up your speech.

    2 add more sound absorbency to the room.

    excessive noise

    1 noisy equipment, such as a computer or fan. may make it difficult for you to hear the other party, both parties should turn off any noisy equipment.

    2 try calling again to see if another line provides a better connection.

    telephone dialing or flash not operational

    contact your dealer to verify that the switches on the bottom of soundstation are set correctly.

    physical damage

    1 if physical damage cauls inlemal parts to hectare accessible, disconnect soundstation

    immediately, do not reconnect it to the network until it has been repaired by a potycom

    authorized repair center.

    if you need more help, please call our help line at 800.polycom (765.9266)