inserting the disk

    1 push the eject lever in the direction of the arrow.

    ?the disk holder opens slightly. gently open the disk holder in the direction of the arrow given below.

    ?a protective spacer is placed inside the disk holder at the time of purchase. remove this spacer if it is present.

   

   

   

    3 push the disk holder closed.

    ?when the disk is inserted, the disk mark in the mode display panel lights.

   

    if the disk mark turns

    ?the disk mark in the mode display panel rotates when a disk is inserted.

    while the mark is rotating, data on the disk is being read and recording cannot be performed. wait until the disk mark stops rotating before using the digital disk camera. (the digital disk camera can be turned on while the disk mark is rotating.)

   

    ejecting the disk

    be careful not to let the disk fall

    depending on how you are holding the digital disk camera, when the disk is ejected, it may fall out of the digital disk camera and become damaged. when ejecting the disk, be careful not to let the disk fall from the disk holder.

    1 if the digital disk camera is turned on, turn it off (see page 35).

    ?press the power button for more than one second.

    ?when the power is turned off, the displays on the mode display panel and lcd monitor (or viewfinder) turn off.

   

    2 push the eject lever in the direction of the arrow.

    ?the disk holder opens slightly.

    3 open the disk holder in the direction of the arrow.

    ?when the disk holder is opened, the disk is ejected.

    4 gently pull out the disk.

   

    help

    if the disk cannot be removed

    if data on the disk is being accessed (the disk mark is rotating; see page 30), the disk holder will not open when the eject lever is pushed. wait until the disk mark stops rotating and the digital disk camera turns off.

    if the digital disk camera is on, the disk cannot be removed. turn off the digital disk camera and then eject the disk with the eject lever.

    the disk can be removed in the power save mode (see page 35).

    if the disk cannot be removed when the digital disk camera is off, turn the digital disk camera back on and then off again, and then eject the disk with the eject lever.