you can add a voice memo to a still image captured in the still image mode, an image saved after magnifying, a compound image, or a copied image.
preparation
1 display the image to which you wish to add a voice memo.
2 press the mode button to display the playback setting screen.
if an image is protected, you cannot add a voice memo. to add a voice memo, first remove the protection (see page 152) and then add the voice memo.
6 press the shutter release button.
?1 the voice memo recording starts. talk into the microphone on the digital disk camera. a maximum of up to ten seconds can be recorded. while the voice memo is being recorded, "recording" appears. to stop the recording before the ten seconds elapses, press the shutter release button again.
?2 when recording is finished, "complete" appears and you return to the edit image screen.
?4 to return to the playback setting screen, press the mode button, or select "exit" and press the set button.
?6 to listen to the voice memo, press the mode button to exit the playback setting screen and then press the set button.
?7 to adjust the volume, see "adjusting the volume" on page 70.
1 voice memos can also be recorded when the image is captured (see page 78).
2 after a voice memo has been added to an image, you can erase only the voice memo (see page 151). also, when an image with a voice memo is erased, the attached voice memo is also erased.
3 if a voice memo is added to an image that already has a voice memo, the new voice memo will replace the previous one.
4 besides using the built-in microphone, you can also record the voice memo by connecting the supplied microphone to the mic input terminal. be aware that the built-in microphone will not work when a microphone is connected to the mic input terminal (see page 49).
help
if "disk full" appears
this indicates that there is not enough empty space on the disk to add a voice memo. if you wish to add a voice memo, you must first erase some data in order to free up some space (see page 149).