1 plug the ac adaptor into an electrical outlet.
2 after making sure that the power switch of the satellite cradle is in the off position, plug the other end of the ac adaptor into the ac terminal at the top of the satellite cradle.
3 after making sure that the power of the satellite cradle and personal computer is off, remove the cover and connect one end of the optional rs-232c cable (dt- 881rsc, dt-882rsc, dt-883rsc, dt- 887ax/axa) to the rs-232c connector at the top of the satellite cradle. connect the other end of the cable to the computer’s rs- 232c connector. when the rs-232c connector is not used, attach the cover.
4 turn on the satellite cradle. the power indicator on the satellite cradle lights red.
5 attach the data collector to the communication port, making sure that the infrared ports on its base come into close contact with each other. the color of the satellite cradle power indicator changes to green when a proper connection is made.
1 the system operation indicator lights green when system operation is normal and the satellite cradle is performing or standing by for the communication with another data collector connected to a satellite cradle.
2 the data communication indicator flashes green when data communication starts.
?high-sensitivity communications devices are used for the irda communications function.
avoid using units or equipment such as a cellular phone emits radio waves during data communication.
to ensure uninterrupted data communication, keep the satellite cradle away from the equipment (at least 30 centimeters from a cellular phone).