the software/hardware screen (system info ] admin setup ] software/hardware) is used to obtain basic information on the software and hardware profiles of the viewstation. for viewstations with multi-point capability, an additional system options icon appears on this screen.

    software information

    the software screen (system info ] admin setup ] software/hardware ] software) provides the following information about the viewstation:

    1 system serial number

    2 bootui number

    3 software version

    4 network interface type (isdn configured viewstations only)

    5 isdn version (isdn configured viewstations only)

    6 isdn region (non-usa isdn configured viewstations only)

    7 isdn switch protocols (isdn configured viewstations only)

    hardware information

    the hardware screen provides the following information about the viewstation:

    1 system serial number

    2 fpga version

    3 network interface type

    4 video comm interface

    5 camera

    6 mic 1 version

    7 mic 2 version (if present)

    system options

    the system options screen (shown in figure 2-62) contains information that enables multi-point features for the viewstation and indicates that the multi-point feature is enabled or disabled.

    key: enter the multi-point key to enable multi-point calling. this key is unique to each viewstation.