to place a telephone call using the viewstation, the viewstation must first be connected to a standard pots or pbx wall jack. see the viewstation quickstart card for more information. to make a call:

    1. from the main calling screen, highlight the telephone icon and press the select button on the remote control.

    the telephone screen is displayed.

   

    2. using the numeric keypad on the remote control, enter the phone number of the party to be called. if dialing within a pbx system, enter the extension number typically used within your pbx system.

    to delete the right-most digit, press the left arrow button on the remote control.

    to clear all information in the number field, use the arrow buttons on the remote control and select the clear button.

    3. to place the call, press the call-hang-up button on the remote control. if you only hear the numbers being dialed and no one answers or there is no dial tone, make sure you have the telephone cable properly connected to the back of the viewstation.

    4. to disconnect from the call, press the call-hang-up button on the remote control. the phone image appears to be on-hook.