1. press the near button on the remote control.
2. select 1 or 2 for the desired camera.
the viewstation displays the camera’s current view full screen on the television monitor. a camera icon facing toward you is displayed at the top right of the screen.
during a call, the camera at the far site may be adjusted only if the far site has its far control of near camera option enabled. other sites can control the camera on your viewstation if this option is enabled. for more information, see “video/camera” on page 90.
to select the far-site camera during a call:
1. press the far button on the remote control.
2. select 1, 2, 3, or 4 for the desired camera.
the viewstation displays the camera’s current view fullscreen on the television monitor. a camera icon facing away from you is displayed at the top right of the screen.
to select another local camera:
1. press the near button on the remote control twice.
at the bottom of the screen, the viewstation displays the icons for all of the connected local cameras.
the main camera cannot be disconnected. however, a primary camera, such as a document camera, may be set as the camera the viewstation uses each time it is powered on. for more information about selecting a primary camera, see “video/camera” on page 90.