the viewstation can be set to store up to ten preset camera positions and zoom settings for up to four near site cameras and the main far site camera. to set a preset:

    1. use the far or near buttons on the remote control to select the near or far site camera.

    1 press the far button twice to display 10 preset icons for the far camera.

    2 press the near button once to display 10 preset icons for the near camera.

    2. position the camera using the arrow buttons and the zoom control on the remote control.

    3. press the select button on the remote control.

    the camera preset circles are displayed on the main television monitor:

    ?1 0-9 for the far camera

    ?2 0-9 for the near camera

    the following table applies to camera presets:

   

    to clear all of the presets, press the # key on the remote control.

    4. press a number button on the remote control to assign that preset button.

    to select a camera preset:

    1. use the near or far buttons on the remote control to determine which camera preset to activate.

    2. immediately press the appropriately numbered button on the remote control.