the normal way to access the dialog is through a menu entry or control button belonging to the application program. for example, vidcap32 offers the following three menu entries for accessing the dialog: options ] source, options ] format, and options ] display. once you are in the dialog, you can move to any other page by clicking on its tab. for example, to access the configuration page from an application, open the source, format, or display (closed caption) page and click the configuration tab.

    another way to access the configuration page under windows nt is through the control panel using the following command sequence:

    1. open the system control panel and multimedia.

    2. click the devices tab.

    3. open video capture devices.

    4. highlight osprey-540 video capture driver.

    5. click properties.

    6. click settings.

    another way to access the configuration page under windows 2000 is through the control panel using the following command sequence:

    steps:

    1. open the system control panel and sounds and multimedia.

    2. click the hardware tab.

    3. highlight legacy video capture devices.

    4. click the properties button.

    5. click the properties tab.

    6. highlight osprey-540.

    7. click the properties button.

    8. click the settings button.

    to access the configuration page under windows xp:

    1. open my computer -] control panel -] sound, speech, and audio devices.

    2. click sounds and audio devices.

    3. click the hardware tab.

    4. select legacy video capture devices.

    5. click properties.

    6. click the properties tab.

    7. select osprey-540 video capture driver.

    8. click properties.

    9. click settings.