this feature selects the method osprey-540 uses to convert audio from one sampling rate to another. for example, audio from a dv source is typically48 khz stereo audio. for various reasons, you may want to capture audio at only 8 khz. for most purposes, the default setting of filter converter works well.

    the registry values which control rate conversion are listed below. the x stands for the device number of the osprey-540 card. numbering starts at 0, so the first osprey-540 card is device 0.

    hkey_current_user\software\osprey\osprey2000\devicex\audio\rateconversion

    when rate conversion is:

    1 1 - use filter converter (default)2

    2 2 - use skip converter (skips samples)

    3 3 - use microsoft pcm method