1 paper from 16 to 20 lbs. (60 to 75 g/m2):
letter size: 60 sheets legal size: 30 sheets
2 paper from 20 to 24 lbs. (75 to 90 g/m2):
letter size: 50 sheets legal size: 25 sheets
(1) fan the paper, and then tap the edge against a flat surface to even the stack.
3 insert the stack of paper into the tray,print side down.
if paper remains in the tray, take it out and combine it into a single stack with the new paper before adding the new paper.
be sure to load the paper so that printing takes place on the print side of the paper. printing on the reverse side may result in poor print quality.
4 push the paper release plate back down.
if the paper release plate is not pushed down, paper feed errors will result.
if the display shows the following alternating messages when making a copy or receiving a fax, check the paper tray. if the tray is empty, add paper and then press t he start/memory key. if there is paper, make sure it is inserted correctly and then press the start/ memory key.
when receiving faxes or copying documents, do not allow a large number of pag es to accumulate in the output tray. this may obstruct the outlet and cause paper jams.
5 the fax has been set at the factory to scale the size of received faxes to letter size paper. if you have loaded legal paper, you must change the paper size setting to legal. press these keys:
6 your fax has been set at the factory to print at normal contrast. depending on the type of paper you have loaded, you may find that you obtain better print quality by changing the setting to light. press these keys:
press the stop key to return to the date and time display.
