with this function, the original document is scanned immediately, stored in memory, and then transmitted once the connection to the receiving machine is made. this is convenient when transmitting to places where the line is often busy, as it saves you from waiting to pick up the original document and frees the feeder for other operations. after transmission, the document will be cleared from memory.

    1 only one memory transmission can be set at a time.

    2 the amount of memory currently occupied appears as a percentage in the display while the document is being scanned.

   

   

   

    3 enter the number of the receiving machine using one of the following methods:

    (1) press a rapid key.

    (2) press the speed dial key and enter a speed dial number.

    (3) enter a full telephone number by pressing the number keys.

   

    4 press the start/memory key if you entered a speed dial number or a full number.

    the document will be scanned and stored in memory. your fax will then dial the receiving machine and transmit the document (redialing will take place automatically if necessary).

   

    if the memory becomes full...

    if the memory becomes full while the document is being scanned, memory is full wil l appear in the display.

    1 press the start/memory key if you want to transmit the pages which have been stored up t o that point in memory. the remaining pages will be ejected from the feeder. after transmission, the memory will be cleared and you can transmit the remaining pages. you will also need to transmit the page which was being scanned when the memory filled up.

    2 press the stop key if you want to cancel the entire transmission.