the timer function allows you to set a transmission and/or polling operation to be performed automatically at a time you specify. one transmission operation and one polling operation can be set at any one time, and the times they will be performed can be specified up to 24 hours in advance.

    . you can use this function to take advantage of lower off-peak telephone rates without having to be there when the operation is performed.

    only a speed dial number can be used to dial the receiving machine.

   

   

   

    4 enter the time at which you want the operation to take place (2 digits for the hour and 2 digits for the minute).

   

   

   

    7 enter the speed dial number of the receiving fax machine.

    if this is a polling operation, go to step 10.

   

   

    9 adjust the resolution and/or contrast if desired (skip to the next step if you don't want to change settings).

   

    10 press the start/memory key and then the stop key. if this is a transmission operation, load the document in the feeder sometime before the specified time of transmission.

   

    to cancel a timer operation

    if you need to cancel a timer operation after it has been set, follow the steps below.