clean the print head frequently to assure optimum printing performance.
2 pull the paper release plate forward and remove the paper.
3 open the operation panel (grasp the finger hold and pull up), and then pull the release on the right side of the machine forward to open the print compartment cover.
4 take the imaging film cartridge out of the print compartment and place it on a sheet of paper.
5 wipe the print head and roller with denatured alcohol.
1 do not use benzene or thinner. avoid touching the print head with hard objects.
2 the print head may be hot if your fax machine has just received a large number of documents. if this is the case, allow the print head to cool prior to cleaning.
6 place the imaging film cartridge back in the print compartment.
7 close the print compartment cover (press down on both sides to make sure it clicks into place), and then close the operation panel.
8 reinsert the paper in the paper tray and push the paper release plate back down.
scanning glass and rollers
clean the scanning glass and rollers frequently to ensure the quality of transmitted images and copies. open the operation panel (grasp the finger hold and pull up), and wipe the scanning glass and rollers with a soft cloth.
1 make sure that all dirt and stains (such as correcting fluid) are removed, as dirts and stains will cause vertical lines on transmitted images and copies.
2 adhesive cellophane tape is useful for removal of debris from the rollers.
when wiping, take care not to damage any of the protruding parts on the underside of the operation panel.
the housing
wipe the external parts and surface of the machine with a dry cloth.
do not use benzene or thinner. these solvents may damage or discolor the machine.