if the original document doesn’t feed properly during transmission or copying, or document jammed appears in the display, first try pressing the start/memory key. if the document doesn't feed out, open the operation panel and remove it.
do not try to remove a document without opening the operation panel. this may damage the feeder mechanism.
1 open the operation panel by grasping the finger hold and pulling up.
clearing jammed printing paper
1 pull the paper release plate forward and remove the paper.
2 open the operation panel (grasp the finger hold and pull up), and then pull the release on the right side of the machine forward to open the print compartment cover.
3 gently pull the jammed paper out of the machine, making sure no torn pieces of paper remain in the print compartment or rollers.
4 close the print compartment cover (press down on both sides to make sure it clicks into place), and then close the operation panel.
5 reinsert the paper in the paper tray and push the paper release plate back down.
