the si 16 and si 24 are designed for easy installation and high performance in an environment where traffic on the network and the number of users increase continuously. the s 116 and s 124 with 19-inch rack-mountable size are specifically designed for large workgroups. they can be installed where space is limited; moreover, they provide immediate access to a rapidly growing network through a wide range of user-reliable functions.

    the s108mandsi 16m arc mini switches and can place on desktop.

    the switches arc ideal for deployment with multiple high-speed servers for shared bandwidth 10mbps or 100mbps workgroups. in 200mbps full-duplex mode, any port can provide workstations with a congestion-free data pipe for simultaneous access to the server.

    the switches are expandable by cascading two or more switches, together. as all ports support 200mbps full duplex, the switches cascading be cascaded from any port and to any number of switches.

    the switches arc a perfect choice for site planning to upgrade to fast ethernet in the future. ethernet workgroups can connect to the switches now, and change adapters and hubs anytime later without needing to change the switches or reconfigure the networks.

    the switches combine dynamic memory allocation with store-and-forward switching to ensure that the buffer is effectively allocated for each port; while, data flow is controlled between the transmitting and receiving nodes to guarantee against all possible packet loss.

    the switches are an unmanaged 10/100 fast ethernet switch that offers solutions in accelerating small ethernet workgroup's bandwidths.

    other key features arc:

    8/16/16/24 utp/stp ports (depending on model) all come with auto-negotiation and operate at 10/100mbps for connection to servers and hubs. all ports can be configured for full or halt-duplex operation.

    uplink/mdⅰ-ⅱ (media dependent interface) port for uplink to another switch, hub or repeater. please note that if you are using the uplink port, you will not be able to use port one (1x or 16x) because these ports are logically connected.